In order to change any of the settings with
which the flowmeter was shipped, or to change existing settings a previous
user chose originally, click on the "Flow Config. I" tab and you will get
the following screen. Proceed to choose the desired settings by clicking
on pull-down menus and entering numbers. This should be fairly self-explanatory.
The software will automatically calculate and display the insertion
dimension and present the user with a proposed range for the meter,
based on an average flow velocity of 2 m/s (~6ft/s). This represents most
common applications, but can be overridden by the user to chose a specific
range. If you require further information click and hold any of the "help"
buttons. Once you are done click "Continue".